| 镍离子注入Al2O3/1Cr18Ni9Ti钎焊界面成分分析 |
| |
| 引用本文： | 张玮 高平. 镍离子注入Al2O3/1Cr18Ni9Ti钎焊界面成分分析[J]. 包头钢铁学院学报, 2000, 19(3): 219-221 |
| |
| 作者姓名： | 张玮 高平 |
| |
| 作者单位： | 中国兵器工业第五二研究所!内蒙古包头014034 |
| |
| 摘 要： | 利用扫描电镜观察了镍离子注入Ａｌ２Ｏ３／１Ｃｒ１８Ｎｉ９Ｔｉ钎焊界面的形貌，并用ｘｌⅡ能谱分析仪对焊缝进行面、线和点扫描成分分析，结果表明，焊接面非常完整，在Ａｌ２Ｏ钎焊料／１Ｃｒ１８Ｎｉ９Ｔｉ相互界面处存在着元素扩散。
|
| 关 键 词： | 不锈钢 钎焊 离子注入 氧化铝陶瓷 成分分析 |
The composition analysis of nickle ion implantated Al2O3/1Cr18Ni9Ti brazing interface |
| |
| ZHANG Wei,GAO Ping,YANG Hai long. The composition analysis of nickle ion implantated Al2O3/1Cr18Ni9Ti brazing interface[J]. Journal of Baotou University of Iron and Steel Technology, 2000, 19(3): 219-221 |
| |
| Authors: | ZHANG Wei GAO Ping YANG Hai long |
| |
| Abstract: | The appearance of Ni ion implanted Al 2O 3/1Cr18Ni9Ti brazing interface was observed with SEM, and the composition of brazing seam was analyzed. The experimental results show that the brazing interface is very complete. There is some element diffusion in the Al 2O 3/filler metal/1Cr18Ni9Ti interface. |
| |
| Keywords: | Al_2O_3 ceramic stainless steel braze ion implantaion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
