| 基于ANSYS的液压支架千斤顶仿真分析 |
| |
| 引用本文： | 毛君,李娜,刘春华. 基于ANSYS的液压支架千斤顶仿真分析[J]. 煤矿机械, 2007, 28(10): 32-33 |
| |
| 作者姓名： | 毛君 李娜 刘春华 |
| |
| 作者单位： | 辽宁工程技术大学,机械学院,辽宁,阜新,123000;辽宁工程技术大学,机械学院,辽宁,阜新,123000;辽宁工程技术大学,机械学院,辽宁,阜新,123000 |
| |
| 摘 要： | 介绍了利用ANSYS软件建立液压支架千斤顶的模型方法。建立了千斤顶的模型之后,对其主要部位进行了有限元分析,从而得出响应的位移变化图及位移数值。最后,对仿真分析得到的结果进行讨论及比较,有限元计算结果可以作为今后千斤顶设计的重要参考依据。
|
| 关 键 词： | ANSYS 液压支架 千斤顶 仿真 |
| 文章编号： | 1003-0794（2007）10-0032-02 |
| 修稿时间： | 2007-06-20 |
Based on ANSYS Hydraulic Pressure Support Hoisting Jack Finite Element Analysis |
| |
| MAO Jun,LI Na,LIU Chun-hua. Based on ANSYS Hydraulic Pressure Support Hoisting Jack Finite Element Analysis[J]. Coal Mine Machinery, 2007, 28(10): 32-33 |
| |
| Authors: | MAO Jun LI Na LIU Chun-hua |
| |
| Affiliation: | Mechanical College of Liaoning Technical University, Fuxin 123000, China |
| |
| Abstract: | Introduced uses the ANSYS software establishment hydraulic power support hoisting jack the method. After has established the hoisting jack model, carries on the finite element to its main spot the analysis, thus obtains the response the displacement change chart and the displacement value. Finally, the result obtains which to the simulation analysis carries on the discussion and the comparison, the finite element computed resuit may take the next hoisting jack will design important reference. |
| |
| Keywords: | ANSYS hydraulic power support hoisting jack simulation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
