| 车载手机座注射模设计 |
| |
| 引用本文： | 黎宴林. 车载手机座注射模设计[J]. 模具制造, 2010, 10(8): 39-44 |
| |
| 作者姓名： | 黎宴林 |
| |
| 作者单位： | 广东省技师学院,广东惠州,516100 |
| |
| 摘 要： | 通过对车载手机座零件的复杂结构分析,为解决多种侧向抽芯和多镶件问题,采用了滑块与弹簧的组合结构和常规的滑块与斜导柱的组合结构。
|
| 关 键 词： | 车载手机座 侧抽芯 注射模 斜滑块 |
Design of Injection Mold for the Car-Seat |
| |
| Li Yanlin. Design of Injection Mold for the Car-Seat[J]. Die & Mould Manufacture, 2010, 10(8): 39-44 |
| |
| Authors: | Li Yanlin |
| |
| Abstract: | Through analysis of the complex structure of the car-seat, in order to solve a variety of core-pulling and multi-lateral inserts problem, use a slider with a combination of spring and conventional structure of the slider and ramps lead in the composite structure. |
| |
| Keywords: | car-seat side core-pulling injection mold inclined slider |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
