| 车用前门锁紧杆加强板合件螺母铆接模 |
| |
| 引用本文： | 许小红,王小华,李海全. 车用前门锁紧杆加强板合件螺母铆接模[J]. 模具工业, 2001, 0(4): 22-23 |
| |
| 作者姓名： | 许小红 王小华 李海全 |
| |
| 作者单位： | 江铃模具中心 |
| |
| 摘 要： | 介绍了全顺车前门锁紧杆加强板合件的螺母铆接模的结构、工艺分析和设计要点 ,把冲孔和铆接在一次行程中完成 ,提高了生产效率
|
| 关 键 词： | 锁紧杆加强板合件 螺母铆接模 新工艺 |
| 修稿时间： | 2000-10-19 |
The Riveting Die for the Combined Reinforcing Plate for Connecting the Locking Rod |
| |
| Xu Xiaohong et al. The Riveting Die for the Combined Reinforcing Plate for Connecting the Locking Rod[J]. Die & Mould Industry, 2001, 0(4): 22-23 |
| |
| Authors: | Xu Xiaohong et al |
| |
| Affiliation: | Xu Xiaohong et al |
| |
| Abstract: | The structure, the technological analysis and the main design points of the riveting die for the combined reinforcing plate for connecting the locking rod of the front door of the automobile were introduced. Accomplishing piercing and riveting in one stroke increased the production efficiency. |
| |
| Keywords: | combined reinforcing plate for connecting the locking rod nut riveting die new technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
