| 高钒高速钢干滑动磨损性能研究 |
| |
| 引用本文： | 季英萍,李炎,魏世忠,龙锐,徐流杰. 高钒高速钢干滑动磨损性能研究[J]. 热加工工艺, 2006, 0(10) |
| |
| 作者姓名： | 季英萍 李炎 魏世忠 龙锐 徐流杰 |
| |
| 作者单位： | 河南科技大学材料科学与工程学院，河南科技大学材料科学与工程学院，河南科技大学材料科学与工程学院，河南省耐磨材料工程技术研究中心 河南洛阳471003，河南省耐磨材料工程技术研究中心，西安交通大学材料学院，河南洛阳471003，河南洛阳471003，河南洛阳471003，河南洛阳471003，陕西西安710049 |
| |
| 基金项目： | 河南省重大科技攻关基金资助项目(0322020300) |
| |
| 摘 要： | 利用MM-200型滑动磨损试验机测试了高钒高速钢在不同压力下的干滑动磨损性能,借助于扫描电镜对其磨损形貌和组织进行观察,并与高铬铸铁对比考察了其耐磨性和磨损机理。结果表明:高钒高速钢的耐磨性明显优于高铬铸铁,其磨损机理为犁削磨损和疲劳磨损的复合,并且有应力作用下碳化物的脆性碎裂及脱落。
|
| 关 键 词： | 高钒高速钢 耐磨性 显微组织 硬度 磨损机理 |
Study on Wear Properties of High-vanadium High-speed Steel under Dry Sliding Condition |
| |
| JI Ying-ping,LI Yan,WEI Shi-zhong,,LONG Rui,XU Liu-jie. Study on Wear Properties of High-vanadium High-speed Steel under Dry Sliding Condition[J]. Hot Working Technology, 2006, 0(10) |
| |
| Authors: | JI Ying-ping LI Yan WEI Shi-zhong LONG Rui XU Liu-jie |
| |
| Affiliation: | JI Ying-ping1,LI Yan1,WEI Shi-zhong1,2,LONG Rui2,XU Liu-jie3 |
| |
| Abstract: | The wear properties of high vanadium high-speed steel were tested at different pressure under dry sliding condition using MM-200 type wear test machine , the surface worn and microstructure was analyzed by means of SEM , and the wear resistance and wear mechanics was contrasted with high chroium cast iron.The results show that the wear resistance of these steels is much better than high chroium cast iron , the wear mechanics is cuting wear , abrasive wear and disintegration or abscission of the carbides under stress. |
| |
| Keywords: | high vanadium high-speed steel wear resistance microstructure hardness wear mechanics |
| 本文献已被 CNKI 等数据库收录！ |
|
