Microstructure and NO decomposition behavior of sol-gel derived (La0.8Sr0.2)0.95MnO3/yttria-stabilized zirconia nanocomposite thin film

(La_0.8Sr_0.2)_0.95MnO₃ and (La_0.8Sr_0.2)_0.95MnO₃/YSZ gel films were deposited by a spin-coating technique on scandium-doped zirconia (ScSZ) substrate using the precursor solution prepared from La(Oi-C₃H₇)₃, Sr(Oi-C₃H₇)₂, Mn(Oi-C₃H₇)₂ and 2-methoxyethanol. By heat-treating the gel films, the membrane reactors, (La_0.8Sr_0.2)_0.95MnO₃|ScSZ|Pt and (La_0.8Sr_0.2)_0.95MnO₃/YSZ|ScSZ|Pt were fabricated. It was found that the pre-firing temperature affected the microstructure evolution of (La_0.8Sr_0.2)_0.95MnO₃ and (La_0.8Sr_0.2)_0.95MnO₃/YSZ thin films. Pre-firing at low temperature resulted in high porosity and large grain size of the thin films. NO decomposition characteristics of the obtained membrane reactors were investigated at 600 °C in reactant gas, 1000 ppm of NO and 2% of oxygen. By applying a direct current to the membrane reactors, NO can be decomposed at the (La_0.8Sr_0.2)_0.95MnO₃ and (La_0.8Sr_0.2)_0.95MnO₃/YSZ composite cathode. By incorporating YSZ into (La_0.8Sr_0.2)_0.95MnO₃, the required consuming power to decompose NO could be reduced.