| 板框式机架定位孔深度的控制 |
| |
| 引用本文： | 武莹. 板框式机架定位孔深度的控制[J]. 重型机械科技, 2007, 0(4): 21-23 |
| |
| 作者姓名： | 武莹 |
| |
| 作者单位： | 太原重型机械集团有限公司,山西030024 |
| |
| 摘 要： | 通过控制定位孔深度准确地配装板框式机架框板间的定位垫，严格控制框板间隙，可避免热模锻油压机承载时框板间出现开缝现象。
|
| 关 键 词： | 板框式机架 加工 定位孔深度 |
| 收稿时间： | 2007-04-18 |
| 修稿时间： | 2007-04-18 |
Depth Control of the Locating Hole for Frame-type Stand |
| |
| Wu Ying. Depth Control of the Locating Hole for Frame-type Stand[J]. Heavy Machinery Science and Technology, 2007, 0(4): 21-23 |
| |
| Authors: | Wu Ying |
| |
| Abstract: | Control the depth of the locating hole, accurately assemble the locating pads between the frame plates of the stands, and strictly control the clearance between the frame plates, which can avoid the uneven clearance between the frame plates when a hot die forging oil press is loaded. |
| |
| Keywords: | frame-type stand frame plate depth of locating hole |
| 本文献已被 维普 等数据库收录！ |
|
