|
|||||
|
|
| MB15-RE 镁合金铸坯在半固态温度下的应力灢应变曲线测试与特征分析 | |
| 引用本文： | 王艳彬,门海豹,陈强,吴茜,林军,朱世凤.MB15-RE 镁合金铸坯在半固态温度下的应力灢应变曲线测试与特征分析[J].精密成形工程,2012,4(3):5-9. |
| 作者姓名： | 王艳彬 门海豹 陈强 吴茜 林军 朱世凤 |
| 作者单位： | 1. 国防科技工业精密塑性成形研究应用中心,重庆400039／中国兵器工业第五九研究所,重庆400039 2. 北方通用动力集团公司,山西大同,037036 3. 中国兵器工业第五九研究所,重庆,400039 |
| 基金项目： | 国家自然科学基金项目，中国博士后基金，重庆博士后基金 |
| 摘 要： | 研究了MB15-RE镁合金常规铸坯在半固态温度下应力-应变曲线变化的影响要素。通过热模拟实验,发现MB15-RE在560℃的半固态温度下应力-应变曲线均可分为3个阶段：应力上升阶段、应力下降阶段和应力稳定阶段;同时在相同应变速率下,合金温度越高,其应力峰值和稳态应力越低,表明曲线与在半固态温度下试样中固液态比例相关;在相同温度下,应变速率越大,峰值应力越大而稳态应力越小,表明了再结晶比例越高,稳态应力越低。 |
| 关 键 词： | MB15-RE镁合金 铸坯 半固态 真应力-真应变曲线 |
| 收稿时间： | 2/6/2012 12:00:00 AM |
| 修稿时间： | 2012/5/10 0:00:00 |
Experimental Study and Analysis of Stress-strain Curves for the MB15-RE Magnesium Alloys Casting Billet under the Semisolid Conditions |
|
| WANG Yan-bin,MEN Hai-bao,CHEN Qiang,WU Qian,LIN Jun and ZHU Shi-feng.Experimental Study and Analysis of Stress-strain Curves for the MB15-RE Magnesium Alloys Casting Billet under the Semisolid Conditions[J].Journal of Netshape Forming Engineering,2012,4(3):5-9. | |
| Authors: | WANG Yan-bin MEN Hai-bao CHEN Qiang WU Qian LIN Jun and ZHU Shi-feng |
| Affiliation: | 1,2(1.National Defence Research and Application Center of Precision Plastic Forming Technology,Chongqing 400039,China;2.No.59 Research Institute Of China Ordnance Industry,Chongqing 400039,China;3.North General Dynamic Group Corporation,Datong 037036,China) |
| Abstract: | The influence factors on stress-strain curves of the MB15-RE magnesium alloys casting billet under the semi-solid conditions were studied.The results of thermal simulation experiment show,the all stress-strain curves in the semisolid temperature of 560 ℃ can be divided into rise,decline and stabilization stages.And under the constant strain rate,the higher temperature can reduce both the peak and steady-state stresses of MB15-RE,which shows the curves are affected by the ratio of phase of samples.In addition,under the same temperature the higher strain-rate can lead to the greater peak and lower steady-state stresses,which shows the greater ratio of recrystallization can lead to lower stabilization stress. |
| Keywords: | MB15-RE magnesium alloy casting billet semisolid the true stress-strain curve |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
| 点击此处可从《精密成形工程》浏览原始摘要信息 | |
| 点击此处可从《精密成形工程》下载全文 | |