| 铝合金端盖件压铸工艺的数值模拟 |
| |
| 引用本文： | 江政.铝合金端盖件压铸工艺的数值模拟[J].精密成形工程,2012,4(1):30-33. |
| |
| 作者姓名： | 江政 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥,230009 |
| |
| 摘 要： | 运用铸造模拟软件Procast对一模四腔的A356铝合金压铸零件进行数值模拟，分析铸件的充型凝固过程，预测缺陷。结果显示：在压射速度为2．5m／s，浇注温度为650℃，模具温度为240℃的条件下四腔同时充填，充型平稳，排气良好，得到充型完整、无缩松缩孔、气孔倾向小的铸件。
|
| 关 键 词： | 压力铸造 缩松缩孔 数值模拟 |
| 收稿时间： | 5/8/2011 12:00:00 AM |
| 修稿时间： | 2012/1/10 0:00:00 |
Numerical Simulation of Die Casting Technology on End Closure of Aluminium Alloy |
| |
| JIANG Zheng.Numerical Simulation of Die Casting Technology on End Closure of Aluminium Alloy[J].Journal of Netshape Forming Engineering,2012,4(1):30-33. |
| |
| Authors: | JIANG Zheng |
| |
| Affiliation: | JIANG Zheng(School of Material Science and Engineering,Hefei University of Technology,Hefei 23009,China) |
| |
| Abstract: | The numerical simulation of filling and solidifying process alloy A356 casting with the mould of four cavities was performed with the casting simulation software Procast,and defect was forecasted according to the result’s analysis.The technical parameters were as follows: injection speed of 2.5 m/s,pouring temperature of 650 ℃,mold initial temperature of 250 ℃,under which the four cavities were simultaneous and stably filled,and the castings of better quality were obtained. |
| |
| Keywords: | die casting shrinkage and porosity numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
