首页 | 本学科首页   官方微博 | 高级检索  
     

L360管焊缝的耐蚀性能
引用本文:陈洪杰,毛书军,孙腾胜,汪沈阳,王丽萍.L360管焊缝的耐蚀性能[J].石油化工腐蚀与防护,2011,28(1):14-16.
作者姓名:陈洪杰  毛书军  孙腾胜  汪沈阳  王丽萍
作者单位:中国石油化工股份有限公司中原油田分公司,河南,濮阳,457001
摘    要:模拟高酸性气田集输系统条件,通过电化学腐蚀失重、氢致开裂和硫化物应力开裂试验对L360管道焊缝进行了耐蚀性研究。结果表明,添加缓蚀剂前后焊缝的腐蚀速率分别为0.437mm/a和0.102mm/a,腐蚀产物包括FeC03,FeS,FeO(OH)和FeO,焊缝没有出现氢致开裂和硫化物应力开裂,但发现少许氢鼓泡。

关 键 词:L360  焊缝  高酸性气田  腐蚀

Study on Anti-Corrosion of L360 Pipe Welds in High Sour Gas Wells
Chen Hongjie,Mao Shujun,Sun Tengsheng,Wang Shenyang,Wang Liping.Study on Anti-Corrosion of L360 Pipe Welds in High Sour Gas Wells[J].Petrochemical Corrosion and Protection,2011,28(1):14-16.
Authors:Chen Hongjie  Mao Shujun  Sun Tengsheng  Wang Shenyang  Wang Liping
Affiliation:Chen Hongjie,Mao Shujun,Sun Tengsheng,Wang Shenyang,Wang Liping SINOPEC Zhongyuan Oilfield(Puyang Henan 457001)
Abstract:Under the conditions of simulated gas-gathering line system of high sour gas well,the anti-corrosion of L360 pipe welds was studied through the electrochemical test,hydrogen induced corrosion(HIC) test and sulfide stress cracking(SSC) test.The results indicated the that corrosion rates before and after corrosion inhibitor addition were 0.437mm/a and 0.102mm/a respectively, and the corrosion products were FeCO_3,FeS,FeO(OH)and FeO.No HIC and SSC cracks were found in the pipe welds,but some hydrogen blisterin...
Keywords:L360
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号