| 车载蓝牙外壳高光无痕注射CAE分析及参数优化 |
| |
| 引用本文： | 胡文文;辛勇. 车载蓝牙外壳高光无痕注射CAE分析及参数优化[J]. 中国塑料, 2010, 24(4): 61-64. DOI: 10.19491/j.issn.1001-9278.2010.04.013 |
| |
| 作者姓名： | 胡文文 辛勇 |
| |
| 作者单位： | 南昌大学机电工程学院 |
| |
| 摘 要： | 以车载蓝牙外壳为例，研究了局部密孔制件与普通制件高光注射成型的区别。利用Moldflow软件结合正交方法、数值模拟和数据处理技术，对高光无痕注射成型工艺进行了模拟分析。针对高光成型指标(翘曲变形、体积收缩率和熔接痕),研究了模具温度对高光制品品质的影响，得出高光制品品质随温度的升高而改善。并在此基础上模拟了熔体温度等多因素对高光制品体积收缩率和翘曲变形的影响，优化了工艺参数。
|
| 关 键 词： | 熔接痕 Taguchi方法 翘曲变形 高光注射成型 |
| 收稿时间： | 2009-11-25 |
Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE |
| |
| HU WenwenXIN Yong. Parameter Optimization of High-gloss & Non-Weld Line Injection Molding for Cases of Automotives Bluetooth Based on CAE[J]. China Plastics, 2010, 24(4): 61-64. DOI: 10.19491/j.issn.1001-9278.2010.04.013 |
| |
| Authors: | HU WenwenXIN Yong |
| |
| Abstract: | Using automotive bluetooth as a model system, differences between the injection moldings for high-gloss and local dense hole plastic parts were studied. The high-gloss injection molding was studied using Moldflow combined with Taguchi method, numerical simulation, and data processing. The influence of mold and melt temperatures on warpage, volumetric shrinkage, and weld line was studied. Based on the research, molding process parameters were optimized. |
| |
| Keywords: | weld line Taguchi method warpage high-gloss injection molding |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
