Fabrication of micro-end mill tool by EDM and its performance evaluation |
| |
Authors: | Ganesh Malayath Sankha Deb |
| |
Affiliation: | 1. Mechanical Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India https://orcid.org/0000-0003-3455-7512;2. Mechanical Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India |
| |
Abstract: | AbstractMicro-milling is a fast, cheap and controlled process compared to other micro-fabrication processes such as lithography, laser/electron/ion beam machining, etc. However, scarcity of cutting tools of very small dimensions often results in limited application of micro-milling. In the present study, electro discharge machining (EDM) is used for fabrication of micro-end mill tool. To ensure high dimensional accuracy of the tool, a parametric study is conducted by replicating the a tungsten carbide block to a tungsten carbide (WC) block. The relationships between the drilled cavities on the block and the features on the micro-tool are established. The influence of machining parameters (voltage, capacitance and spindle speed) on the response variables (entrance diameter, hole depth, material removal rate (MRR) and surface roughness) is reported. Capacitance is found more dominant as compared to other selected process parameters. Using optimized parameters from the parametric study, a WC micro-end mill tool of 100?µm diameter is fabricated. Channel of around 110 µm width, 40?µm depth and surface roughness of 70?nm is successfully fabricated on aluminum. The performance of the fabricated tool is compared with a commercial end mill tool by milling micro channels on stainless steel. |
| |
Keywords: | Micro-EDM micro-milling micro-end mill tool MRR surface roughness |
|
|