Experimental investigation and economic analysis of surfactant (Span-20) in powder mixed electrical discharge machining (PMEDM) of AISI D2 hardened steel

Abstract

Powder mixed EDM (PMEDM) is recognized as an advanced and innovative technique with enhanced performance and limited drawbacks in comparison to conventional EDM method. This study investigates the effect of powder particle size, various powder concentrations (C_p), and surfactant concentrations (C_s) on the performance of EDM. Since the machining characteristics are highly dependent on the dielectric performances, significant attention has been directed to introduce Cr powder and Span-20 surfactant into the dielectric fluid to achieve higher productivity and enhanced surface integrity. The EDM machining was carried out on AISI D2 hardened steel through ´Plug & Plaý dielectric circulating system attached to the main machine in order to evaluate the machining performances (i.e. MRR, EWR, and R_a). Interestingly, machining performance was improved with combination of Cr powder mixed and span-20 surfactant. By comparing the performance of span-20 surfactant and micro-nano chromium, the result within selected parameters shows that the span-20 surfactant and nano-chromium is the better choice for the EDM of AISI D2 hardened steel. In the machinability studies, the EDM machining of AISI D2 hardened steel by using span-20 surfactant and nano-chromium has exhibited the excellent machining performances, which led to 45.08% MRR enhancement and 68.89% R_a enhancement comparing to micro-chromium powder and span-20 surfactant led to 35.28% MRR and 28.96% R_a. Furthermore, cost analysis revealed that the nano-Cr powder size was approximately 4 times more economical than micro-Cr powder in machining of AISI D2 hardened steel, although the price for 1?kg is quite expensive.