首页 | 本学科首页   官方微博 | 高级检索  
     

超声波测距信号小波阈值去噪参数的选定方法
引用本文:陈文会,丁晓鸿.超声波测距信号小波阈值去噪参数的选定方法[J].传感技术学报,2017,30(3).
作者姓名:陈文会  丁晓鸿
作者单位:1. 西北工业大学电子信息学院,西安,710129;2. 陕西脉航交通测控有限公司,西安,710061
基金项目:2015年江苏省科委基金项目
摘    要:讨论了超声波测距信号小波阈值去噪参数的选定方法和最优选取原则.在超声波测距回波信号中加入10 dB的噪声信号,在MATLAB仿真环境下,用硬阈值函数、软阈值函数、半软阈值函数,分别对超声波回波信号进行处理,通过实验分析得出,在选取2层分解、消失矩阶数为5时,选择Sym7小波基、半软阈值函数降噪时,信号SNR改善较大,为5.35 dB,RMSE最小,为0.094 dB,说明在有效去除信号噪声的同时,重构后的失真最小.

关 键 词:超声回波信号  小波去噪  参数选定

The Parameter Selection Method of Wavelet Threshold Denoising in Ultrasonic Ranging signal process
CHEN Wenhui,DING Xiaohong,CHEN Jiangning,LIU Xiaomin.The Parameter Selection Method of Wavelet Threshold Denoising in Ultrasonic Ranging signal process[J].Journal of Transduction Technology,2017,30(3).
Authors:CHEN Wenhui  DING Xiaohong  CHEN Jiangning  LIU Xiaomin
Abstract:Discuss the parameter selection and optimal by researching the de-noising problem of wavelet transform in ultrasonic echo signal.The detailed research about the parameters optimal including how to select the wavelet base,decomposition layers,threshold value and threshold function were fully discussed.Under the MATLAB environment,the hard threshold function,soft threshold function and semi-soft threshold function are utilized to deal with the ultrasonic echo signal of SNR 10 dB respectively.Experimental result shows that the semi-soft threshold function can reach SNR 5.35 dB and RMSE 0.094d B.
Keywords:ultrasonic echo signal  wavelet de-noising  parameter selection
本文献已被 万方数据 等数据库收录!
点击此处可从《传感技术学报》浏览原始摘要信息
点击此处可从《传感技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号