| 保护罩注射模设计 |
| |
| 引用本文： | 梁兴华,雷君相,郝帅. 保护罩注射模设计[J]. 模具制造, 2009, 9(8): 9-11 |
| |
| 作者姓名： | 梁兴华 雷君相 郝帅 |
| |
| 作者单位： | 1. 上海理工大学机械工程学院,上海,200093
2. 北京清畅电力技术股份有限公司,北京,100085 |
| |
| 摘 要： | 介绍了保护罩注射模的设计，模具采用1模两腔结构。模具结构简单合理，生产效率较高，所生产的塑件质量满足设计要求。
|
| 关 键 词： | 保护罩 注射模 侧型芯 斜导柱 |
Design of Injection Mold for the Protective Cover |
| |
| Abstract: | Mainly introduced the designing of protective cover injection mold.The mold has two cavities for forming the workpiece,which increased production efficiency and realizes the mass production.The mold' s structure is simple and reasonable,production efficiency is high,plastic part quality meet request.satisfy technical requirement. |
| |
| Keywords: | protective cover injection mold side core angle pin |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
