首页 | 本学科首页   官方微博 | 高级检索  
     

应用网络芯片实现USB2.0远程数据采集的研究
引用本文:李广泽,高世杰,竺晓山,吴志勇,郝志航.应用网络芯片实现USB2.0远程数据采集的研究[J].电光与控制,2006,13(4):78-80,96.
作者姓名:李广泽  高世杰  竺晓山  吴志勇  郝志航
作者单位:中国科学院长春光学精密机械与物理研究所,长春130033;中国科学院研究生院,北京,100039;中国科学院长春光学精密机械与物理研究所,长春130033;中国科学院研究生院,北京,100039
基金项目:吉林省科技厅资助项目;中国科学院基金
摘    要:基于远程数据采集的特殊要求,远程端使用DSP TMS320F240控制AD转换器AD7492进行数据采集,控制网络芯片数据传输,本地端使用USB2.0接口芯片(Cy7c68013)作为数据传输的核心,用它控制网络芯片,采用GPIF(通用可编程接口)异步读写Auto-In/Out(自动打包),块传输方式通过网络芯片对数据进行编/解码,采样频率达100KSPS。

关 键 词:通用串行总线  通用可编程接口  以太网  固件
文章编号:1671-637X(2006)04-0078-03
收稿时间:2005-06-29
修稿时间:2005-06-292005-07-15

Remote data acquisition of USB2.0 based on network chip
LI Guang-ze,GAO Shi-jie,ZHU Xiao-shan,WU Zhi-yong,HAO Zhi-hang.Remote data acquisition of USB2.0 based on network chip[J].Electronics Optics & Control,2006,13(4):78-80,96.
Authors:LI Guang-ze  GAO Shi-jie  ZHU Xiao-shan  WU Zhi-yong  HAO Zhi-hang
Affiliation:1. Changchun Institute of Optics, Fine Mechanics and Physics, Changchun 130033, China ; 2. Graduate School, Chinese Academy of Sciences, Belling 100039, China
Abstract:Based on the special requirement for remote data acquisition,we use TMS320F240 in the remote end to control the AD converter,AD7492,for data acquisition and network chip data transmission control.USB2.0 interface chip(Cy7c68013) is used in the local end,which is the center for data transmission.It is used for controlling the network chip.General programmable interface(GPIF) is used for read/write Auto-In/Out asynchronously.The bulk transmission mode is used for data packet coding/decoding through the network chip.Experiment result shows that the sampling frequency is up to 100KSPS.
Keywords:universal serial bus(USB)  general programmable interface(GPIF)  Ethernet  firmware  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号