| 基于SolidWorks、RP和RT技术的模具设计与制造 |
| |
| 引用本文： | 项建云,葛茂忠.基于SolidWorks、RP和RT技术的模具设计与制造[J].模具技术,2007(4):7-10. |
| |
| 作者姓名： | 项建云 葛茂忠 |
| |
| 作者单位： | 常州轻工职业技术学院,机械系,江苏,常州,213164 |
| |
| 摘 要： | SolidWorks技术、快速成形技术和快速模具制造技术的集成是一种全新的设计制造技术.分析了硅橡胶模具的特点,并以工艺品的模具设计制造为例,介绍了使用SolidWorks、RP和RT技术设计制造模具的工艺过程.实践证明:SolidWorks、RP和RT技术的集成,可以缩短模具开发周期,降低开发成本.
|
| 关 键 词： | SolidWorks 快速成形 快速模具制造 技术 模具 SolidWorks 模具设计 设计制造技术 based design and manufacturing Mould 开发成本 模具开发周期 实践 工艺过程 使用 工艺品 橡胶模具 分析 集成 模具制造技术 快速成形技术 |
| 文章编号： | 1001-4934（2007）04-0007-04 |
| 收稿时间： | 2007-05-15 |
| 修稿时间： | 2007-05-15 |
Mould design and manufacturing based on SolidWorks and RP、RT techniques |
| |
| XIANG Jian-yun,GE Mao-zhong.Mould design and manufacturing based on SolidWorks and RP、RT techniques[J].Die and Mould Technology,2007(4):7-10. |
| |
| Authors: | XIANG Jian-yun GE Mao-zhong |
| |
| Abstract: | The inte and manufacturing grity of SolidWorks, rapid prototyping and rapid tooling is a novel design technique. The feature of silicon rubber mould was introduced. Process of design and manufacturing mould using SolidWorks, RP and RT techniques was introduced based on an artware example. It is proved by practice that the integration of the techniques can shorten mould development cycle and reduce development cost. |
| |
| Keywords: | Solidworks rapid prototyping rapid tooling techniques mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
