| 空间凸轮过渡圆弧的设计及尖角过渡过切现象分析 |
| |
| 引用本文： | 褚辉生. 空间凸轮过渡圆弧的设计及尖角过渡过切现象分析[J]. 机械传动, 2005, 29(1): 10-12 |
| |
| 作者姓名： | 褚辉生 |
| |
| 作者单位： | 常州工学院,江苏,常州,213002 |
| |
| 摘 要： | 对空间凸轮的过渡圆弧的半径大小对凸轮运动规律的影响进行了分析，得出过渡圆弧半径应大于槽宽的一半，尖角过渡数控加工时会产生过切现象。
|
| 关 键 词： | 空间凸轮 过渡圆弧 过切 |
| 文章编号： | 1004-2539(2005)01-0010-03 |
| 修稿时间： | 2004-05-08 |
Design for Transition Arc of Spacial Cam and Analyse of Excessive Removal of Sharp-angled Transition |
| |
| Chu huisheng. Design for Transition Arc of Spacial Cam and Analyse of Excessive Removal of Sharp-angled Transition[J]. Journal of Mechanical Transmission, 2005, 29(1): 10-12 |
| |
| Authors: | Chu huisheng |
| |
| Affiliation: | Chu huisheng |
| |
| Abstract: | The paper analyses affecting on movement law of special cam that by transition arc radius of special cam,we conclude that transition arc radius should be great than half of groove's width and that sharp-angled transition will bring excessive removal while NC-machining. |
| |
| Keywords: | spacial cam transition arc excessive removal |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
