首页 | 本学科首页   官方微博 | 高级检索  
     


Intrinsic birefringence of nylon 6
Authors:Edward Balcerzyk,Wojciech Koz&#x  owski,Ewa Weso&#x  wska,Weronika Lewaszkiewicz
Affiliation:Edward Balcerzyk,Wojciech Kozłowski,Ewa Wesołwska,Weronika Lewaszkiewicz
Abstract:Different values are reported in the literature for the intrinsic birefringence of the crystalline (Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-1) and the amorphous (Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-2) phases in nylon 6. Mostly, these values have either been determined by extrapolation (and then it is assumed that Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-3 = Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-4) or calculated theoretically. In this study, intrinsic birefringence values Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-5 and Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-6 for nylon 6 were determined using the Samuels two-phase model which correlates sonic modulus with structural parameters. Three series of fiber samples were used: (1) isotropic samples of different degrees of crystallinity for estimation of Eurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-7 and Eurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-8 moduli at two temperatures. The following modulus values were obtained: 1.62 × 109 and 6.66 × 109 N/m2 for 28.5°C, and 1.81 × 109 and 6.71 × 109 N/m2 for ?20°C; (2) anisotropic, amorphous fiber samples for estimation of Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-9 = 0.076 and Eurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-10 = 1.63 × 109 N/m2 at 28.5°C; (3) semicrystalline samples of various draw ratios for estimations of Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-11 = 0.089 and Δnurn:x-wiley:00218995:media:APP070260807:tex2gif-stack-12 = 0.078. All measurements were carried out with carefully dried samples to avoid erroneous results caused by moisture.
Keywords:
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号