| 小型材轧钢厂倍尺飞剪故障分析及改进措施 |
| |
| 引用本文： | 刘建新,陈海柱. 小型材轧钢厂倍尺飞剪故障分析及改进措施[J]. 甘肃冶金, 2004, 26(4): 41-43 |
| |
| 作者姓名： | 刘建新 陈海柱 |
| |
| 作者单位： | 八一钢铁股份有限公司,小型材轧钢厂,新疆,乌鲁木齐,830022 |
| |
| 摘 要： | 针对小型材轧钢厂倍尺飞剪有时出现不正常剪切故障问题 ,依据其控制原理 ,分析了故障原因并提出了解决措施 ,提高了飞剪的作业率。
|
| 关 键 词： | 倍尺飞剪,控制,故障 原因分析 改进措施 |
| 文章编号： | 1672-4461(2004)04-0041-03 |
| 修稿时间： | 2004-09-12 |
Fault Analysis of Diploid Measure Flying Shear for Rods and Its Countermeasures |
| |
| LIU Jian-xin,CHEN Hai-zhu. Fault Analysis of Diploid Measure Flying Shear for Rods and Its Countermeasures[J]. Gansu Metallurgy, 2004, 26(4): 41-43 |
| |
| Authors: | LIU Jian-xin CHEN Hai-zhu |
| |
| Abstract: | In view of fault of diploid measure flying shear for rod, the causes were analyzed based on the control theory, and the resolve measures were put forward. As the result, the operating rate was increased. |
| |
| Keywords: | diploid measure flying shear control fault countermeasure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
