首页 | 本学科首页   官方微博 | 高级检索  
     

纳米SiO2和丁苯胶粉复合改性水泥基材料的强度及抗渗性能
引用本文:王智鑫,梅军鹏,李海南,董崇,张洁林,周兰兰,牛寅龙.纳米SiO2和丁苯胶粉复合改性水泥基材料的强度及抗渗性能[J].硅酸盐通报,2022,41(12):4154-4162.
作者姓名:王智鑫  梅军鹏  李海南  董崇  张洁林  周兰兰  牛寅龙
作者单位:1.武汉科技大学城市建设学院,武汉 430065;2.武汉科技大学高性能工程结构研究院,武汉 430065;3.武汉纺织大学工程造价系,武汉 430200;4.中建三局第一建设工程有限责任公司,武汉 430040
基金项目:国家自然科学基金(51908434);湖北省教育厅科学技术研究计划(Q20191706);硅酸盐建筑材料国家重点实验室(武汉理工大学)开放基金(SYSJJ2022-20)
摘    要:本文研究了单掺丁苯胶粉(SBR)和复掺SBR/纳米SiO2(NS)对水泥基材料抗折强度、抗压强度、吸水率、抗氯离子渗透系数的影响规律,并采用XRD、DSC-TG、FTIR、SEM-EDS、MIP等手段对水泥基材料水化产物和微观结构进行分析,探究单掺SBR和复掺SBR/NS对水泥基材料强度及抗渗性能的影响机理。结果表明,复掺SBR/NS显著改善了由单掺SBR引起的水泥基材料早期强度下降的问题,单掺SBR和复掺SBR/NS均可降低试样的吸水率、吸水速率和非稳态氯离子迁移系数,且复掺效果优于单掺。微观测试表明:单掺SBR可降低Ca(OH)2的含量,减少有害孔和多害孔的数量,增加结构整体性;复掺SBR/NS可进一步降低Ca(OH)2的含量,促进水化反应生成更多C-S-H,提高C-S-H的聚合度,降低最可几孔径,减少少害孔、有害孔和多害孔的数量,降低水化产物的钙硅比,从而增强试样的抗折强度和抗压强度并提高其抗渗性能。

关 键 词:丁苯胶粉  纳米SiO2  强度  吸水率  快速氯离子迁移系数法  孔结构  
收稿时间:2022-07-11

Strength and Impermeability of Cement-Based Materials with Nano SiO2 and Styrene-Butadiene Rubber Powder Composite Modification
WANG Zhixin,MEI Junpeng,LI Hainan,DONG Chong,ZHANG Jielin,ZHOU Lanlan,NIU Yinlong.Strength and Impermeability of Cement-Based Materials with Nano SiO2 and Styrene-Butadiene Rubber Powder Composite Modification[J].Bulletin of the Chinese Ceramic Society,2022,41(12):4154-4162.
Authors:WANG Zhixin  MEI Junpeng  LI Hainan  DONG Chong  ZHANG Jielin  ZHOU Lanlan  NIU Yinlong
Affiliation:1. School of Urban Construction, Wuhan University of Science and Technology, Wuhan 430065, China;2. Institute of High Performance Engineering Structure, Wuhan University of Science and Technology, Wuhan 430065, China;3. Department of Construction Cost, Wuhan Textile University, Wuhan 430200, China;4. China Construction Third Bureau First Engineering Co., Ltd., Wuhan 430040, China
Abstract:In this paper, the flexural strength, compressive strength, water absorption and unsteady chloride ion migration coefficient were used to investigate the effect of styrene-butadiene rubber powder (SBR)/nano SiO2 (NS) on strength and impermeability of cement-based materials. The hydration products and microstructure of cement-based materials were analyzed by XRD, DSC-TG, FTIR, SEM-EDS and MIP. Results show that complex SBR/NS significantly improves the early strength degradation of cement-based materials caused by single SBR. Both single SBR and complex SBR/NS reduce the water absorption, water absorption rate and unsteady chloride ion migration coefficient, and the effect of complex SBR/NS is better than that of single SBR. The microscopic test shows that the single SBR reduces the content of Ca(OH)2 and the number of harmful pores and more-harmful pores and increases the integrity of the structure. The complex SBR/NS further reduces the content of Ca(OH)2, promotes the hydration reaction to generate more C-S-H, improves the polymerization degree of C-S-H, decreases the most probable aperture, reduces the amount of less-harmful pores, harmful pores and more-harmful pores, lowers the Ca/Si ratio of hydration products, and thus enhances the flexural strength, and compressive strength and improves the impermeability of the sample.
Keywords:styrene-butadiene rubber powder  nano SiO2  strength  water absorption  RCM  pore structure  
点击此处可从《硅酸盐通报》浏览原始摘要信息
点击此处可从《硅酸盐通报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号