| 基于DSP技术的等离子切割机电源系统的研究 |
| |
| 引用本文： | 刘立立,杨永才,王世通,陈蕤,赵东雪.基于DSP技术的等离子切割机电源系统的研究[J].现代电子技术,2008,31(22). |
| |
| 作者姓名： | 刘立立 杨永才 王世通 陈蕤 赵东雪 |
| |
| 作者单位： | 上海理工大学,光学与电子信息工程学院,上海,200093 |
| |
| 摘 要： | 该设计应用DSP技术对等离子切割电源系统的功率因数进行校正,减小了谐波对电网的干扰,提高了电源输出的稳定性。该系统的各级控制环节采用德州仪器生产的DSP芯片TMS320F2812数字信号处理器进行处理,建立等离子切割电源功率因数的数字化控制系统。该系统应用电流传感器检测boost模块的输入电流,通过采样与A/D变换和PID控制实现稳定的恒电流输出,从而有效地提高了电源系统的功率因数和工作稳定性,增强了系统的抗高频干扰能力。
|
| 关 键 词： | 等离子切割机电源 DSP 功率因数校正 PWM TMS320F2812 |
Research of Plasma Arc Cutting Power System Based on DSP |
| |
| LIU Lili,YANG Yongcai,WANG Shitong,CHEN Rui,ZHAO Dongxue.Research of Plasma Arc Cutting Power System Based on DSP[J].Modern Electronic Technique,2008,31(22). |
| |
| Authors: | LIU Lili YANG Yongcai WANG Shitong CHEN Rui ZHAO Dongxue |
| |
| Abstract: | The design improves the power factor in the plasma arc cutting power system with digital singnal processor,induces the inference to electrical network,improves the stability of power supply system.The digital control system for plasma arc cutting power system has been developed by using digital signal processor TMS320F2812,which produced by Taxas Instrument.After sampling,A/D conversion and digital filtering on the input current of boost model,which is detected by current sensor,a stable constant current output characteristic is realized via PID control,So that,the power factor and operational stability of power supply system and the anti-disturbance ability to high frequency noise of digital control system are improved effectively. |
| |
| Keywords: | plasma cutting power DSP power factor correction PWM TMS320F2812 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
