首页 | 本学科首页   官方微博 | 高级检索  
     

超细镍基催化剂下甲苯加氢性能的分析
引用本文:秦青,李为民,尹泓森. 超细镍基催化剂下甲苯加氢性能的分析[J]. 化工进展, 2012, 31(6): 1250-1254
作者姓名:秦青  李为民  尹泓森
作者单位:常州大学,江苏省精细石油化工重点实验室,江苏 常州 213164
基金项目:连云港科技局国际合作项目
摘    要:以正硅酸乙酯(TEOS)、酞酸丁酯、硝酸镍为原料,采用溶胶-凝胶法制备了超细镍基催化剂,并进行了表征,通过改变工艺条件进行单因素实验,确定了超细镍基催化剂催化甲苯加氢的最合适工艺条件为:反应温度170 ℃、压力0.6 MPa、空速4 h-1、氢烃比10︰1,甲苯加氢生成甲基环己烷的转化率为100%,在80~200 ℃的实验范围内,选择性良好,并无开环及其它副反应的发生,甲基环己烷的选择性100%,实验表明溶胶-凝胶法制备的超细镍基催化剂是优良的甲苯加氢催化剂。

关 键 词:溶胶凝胶  超细镍基催化剂  甲基环己烷  甲苯

Analysis on toluene hydrogenation by ultrafine nickel-based catalyst
QIN Qing,LI Weimin,YIN Hongsen. Analysis on toluene hydrogenation by ultrafine nickel-based catalyst[J]. Chemical Industry and Engineering Progress, 2012, 31(6): 1250-1254
Authors:QIN Qing  LI Weimin  YIN Hongsen
Affiliation:Jiangsu Key Laboratory of Fine Petrochemical Technology,Changzhou University,Changzhou 213164,Jiangsu,China
Abstract:Ultrafine nickel-based catalyst was prepared by sol-gel using tetraethoxy-silane(TEOS), n-butyl phthalate acid,and nickel nitrate as raw materials,and the samples were characterized.The most appropriate process condition was determined for the ultrafine nickel-based hydrogenation catalysts toluene by changing the temperature,pressure,space velocity,hydrogen and other hydrocarbon process conditions.The results show that the maximum conversion of toluene hydrogenation rate of 100% when the temperature is between 160—170 ℃,pressure is between 0.6—0.8 MPa,airspeed is 4 h-1,hydrogen-hydrocarbon ratio is 10∶1.Selectivity within 80—200 ℃ range is better than others without open-loop and other side reactions.Selectivity can reach 100%. Therefore,a nickel-based catalyst from dual silicon source sol-gel preparation is an excellent catalyst for toluene hydrogenation.
Keywords:sol-gel  supported ultrafine nickel catalysts  methylcyclohexane  toluene
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工进展》浏览原始摘要信息
点击此处可从《化工进展》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号