| 基于计算机仿真的ABS开发平台研究 |
| |
| 引用本文： | 林明,肖铁军,张育华.基于计算机仿真的ABS开发平台研究[J].计算机仿真,2006,23(7):244-248. |
| |
| 作者姓名： | 林明 肖铁军 张育华 |
| |
| 作者单位： | 江苏大学计算机科学与通信工程学院,江苏,镇江,212013;江奎集团汽车电子产业部,江苏,镇江,212009 |
| |
| 基金项目： | 江苏省科技厅科技攻关项目 |
| |
| 摘 要： | 该文阐述了基于计算机仿真的制动防抱系统开发技术，详细介绍了基于计算机仿真的制动防抱系统开发的三个步骤，并且给出了各个阶段的试验方案；建立了双轴汽车的制动防抱系统通用仿真开发平台，该平台具有对各种车辆ABS开发的互换性，并且操作简易，灵活；为了模拟ABS在各种路面的制动状况，该平台设计出了路面跃变模块，可进行单一路面和跃变路面的制动防抱系统仿真试验。根据试验结果验证，模型准确可靠，可以用于下一步控制器的研究开发。
|
| 关 键 词： | 制动防抱系统 计算机仿真 建模 |
| 文章编号： | 1006-9348(2006)07-0244-05 |
| 收稿时间： | 2005-05-27 |
| 修稿时间： | 2005年5月27日 |
Development Platform of Vehicle ABS Based on Computer Simulation |
| |
| LIN Ming,XIAO Tie-jun,ZHANG Yu-hua.Development Platform of Vehicle ABS Based on Computer Simulation[J].Computer Simulation,2006,23(7):244-248. |
| |
| Authors: | LIN Ming XIAO Tie-jun ZHANG Yu-hua |
| |
| Affiliation: | 1. School of Computer Science and Telecommunication Engineering,Zhenjiang Jiangsu 212013, China; 2. Automotive Electronic Division of Jiangkui Group , Zhenjiang, Jiangsu 212009,China |
| |
| Abstract: | The ABS developmental technology based on computer simulation is presented,three steps of development are presented in detail and experimentation is designed.An universal simulation platform for double axle's vehicle is set up,the interconvertibility of the model is suitable for various vehicles.In order to simulate the actual ABS status in various roads,the module of variational road is designed,so the model can be tested on a single road or variational road.Based upon testing result,the model is proved to be credible and exact,thereby it can be used in the controller development. |
| |
| Keywords: | ABS Computer simulation Modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
