|
|||||
|
|
| 叠层材料变参数振动钻削模型与实验研究 | |
| 引用本文： | 臧雪柏,赵宏伟,于繁华,王立江. 叠层材料变参数振动钻削模型与实验研究[J]. 吉林大学学报(工学版), 2001, 31(4): 33-37 |
| 作者姓名： | 臧雪柏 赵宏伟 于繁华 王立江 |
| 作者单位： | 1. 吉林大学计算机科学与技术学院. 2. 长春师范学院, 3. 吉林大学机械科学与工程学院, |
| 基金项目： | 国家自然科学基金资助项目（59675059），吉林省科学技术厅资助项目（20010570） |
| 摘 要： | 简述了叠层材料的特点及其应用，分析了叠层材料的结构特点，提出了接合区和泛接合区的概念。在此基础上建立了叠层材料变参数振动钻削的加工模型，给出了３层叠层材料５区段变参数振动钻削加工方案。多种叠层材料的加工实验表明，采用变参数振动钻削工艺可明显改善加工指标，是合理有效的工艺方法。 |
| 关 键 词： | 叠层材料 振动钻削 加工模型 实验研究 |
| 文章编号： | 1002-378X(2001)04-0033-05 |
| 修稿时间： | 2001-05-18 |
Model and Experimental Research of Vibration Drilling Laminated Materials by Variation Parameters |
|
| ZANG Xue-bai,ZHAO Hong-wei YU Fan-hua,WANG Li-jiang. Model and Experimental Research of Vibration Drilling Laminated Materials by Variation Parameters[J]. Journal of Jilin University:Eng and Technol Ed, 2001, 31(4): 33-37 | |
| Authors: | ZANG Xue-bai ZHAO Hong-wei YU Fan-hua WANG Li-jiang |
| Affiliation: | ZANG Xue-bai1,ZHAO Hong-wei1 YU Fan-hua2,WANG Li-jiang3 |
| Abstract: | In this paper, the authors first describe the characteristics of laminated materials and its applica- tions, analyze its structural properties, and present conceptions of the bounding pod and multi-bounding pad. On the basis of this, the authors establish the machining model of vibration drilling laminated materials by variation parameters and present five-stage vibration drilling model by variation parameters for laminated materials with three layers. Machining experiments in many kinds of laminated materials show that machin- ing quality can be greatly improved by vibration drilling model with variation parameters and the machining is reasonable and practical. |
| Keywords: | laminated materials vibration drilling machining model experimental research |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |