Comparison of measured and calculated reaction rate distributions in an scwr-like test lattice

High resolution gamma-ray spectroscopy measurements were performed on 61 rods of an SCWR-like fuel lattice, after irradiation in the central test zone of the PROTEUS zero-power research reactor at the Paul Scherrer Institute in Switzerland. The derived reaction rates are the capture rate in ²³⁸U (C₈) and the total fission rate (F_tot), and also the reaction rate ratio C₈/F_tot. Each of these has been mapped rod-wise on the lattice and compared to calculated results from whole-reactor Monte Carlo simulations with MCNPX. Ratios of calculated to experimental values (C/E’s) have been assessed for the C₈, F_tot and C₈/F_tot distributions across the lattice. These C/E’s show excellent agreement between the calculations and the measurements. For the ²³⁸U capture rate distribution, the 1σ level in the comparisons corresponds to an uncertainty of ±0.8%, while for the total fission rate the corresponding value is ±0.4%. The uncertainty for C₈/F_tot, assessed as a reaction rate ratio characterizing each individual rod position in the test lattice, is significantly higher at ±2.2%. To determine the reproducibility of these results, the measurements were performed twice, once in 2006 and again in 2009. The agreement between these two measurement sets is within the respective statistical uncertainties.