首页 | 本学科首页   官方微博 | 高级检索  
     

细胞腔填充法制备磁性纸影响填充度的因素分析
引用本文:杨欣,龙柱,李海峰.细胞腔填充法制备磁性纸影响填充度的因素分析[J].中华纸业,2008,29(6):14-16.
作者姓名:杨欣  龙柱  李海峰
作者单位:江南大学生态纺织教育部重点实验室,江苏无锡,214122
基金项目:江苏省自然科学基金 , 江苏省"青蓝工程"优秀青年骨干教师培养对象经费资助项目
摘    要:研究了影响细胞腔填充法制备磁性纸填充度的主要因素。研究结果表明:针叶木化学浆的填充效果比阁叶木化学浆的填充效果好;使用针叶木化学浆获得适宜填充效果的工艺条件为:聚乙烯亚胺用量5mg/g(对绝干纸浆);硫酸铝的浓度0.0075g/l;搅拌速度2500r/min;打浆度29°SR;搅拌时间30min;增加四氧化三铁的用量和延长处理时间可以提高填充度。

关 键 词:细胞腔填充法  磁性纸  填充度
文章编号:1007-9211(2008)06-0014-03
收稿时间:2007-10-22
修稿时间:2007年10月22

An analysis on influencing factors of loading degree in fiber lumen loading process of magnetic paper
YANG Xin,LONG Zhu,LI Hai-feng.An analysis on influencing factors of loading degree in fiber lumen loading process of magnetic paper[J].China Pulp & Paper Industry,2008,29(6):14-16.
Authors:YANG Xin  LONG Zhu  LI Hai-feng
Affiliation:YANG Xin, LONG Zhu,LI Hal-fen(Key Laboratory of Eco-textile of Education Ministry, Jiangnan University, Wuxi 214122, Jiangsu, China)
Abstract:With lumen-loading methods applied, the major influencing factors of loading degree in the process of magnetic paper were studied. The research results show that loading degree of soft wood is better than that of hard wood. The optimal loading conditions are:PEI dosage 5mg/g (on o.d. pulp ), Al2(SO4)3 concentration 0.0075g/l, the agitation speed 2500r/min, beating degree 29SR, agitating time 30 min. The loading degree can be raised by increasing the dosage of Fe3O4and prolonging the treating time.
Keywords:fiber lumen loading  magnetic paper  loading degree
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号