| 边缘倒角类零件精冲技术的研究 |
| |
| 引用本文： | 杨瑞锋,彭群,赵彦启.边缘倒角类零件精冲技术的研究[J].锻压技术,2011,36(4):35-38. |
| |
| 作者姓名： | 杨瑞锋 彭群 赵彦启 |
| |
| 作者单位： | 1. 机科发展科技股份有限公司北京分公司,北京,100083
2. 北京机电研究所精冲中心,北京,100083 |
| |
| 基金项目： | “高档数控机床与基础制造装备”科技重大专项(2009ZX04014-073) |
| |
| 摘 要： | 在精冲零件边缘处加工倒角,需要复合冷挤压或冷锻等工艺.由于成形力的不对称,导致加工中出现影响正常送料步距的“爬科”现象及倒角偏差等问题,以致无法获得合格的零件.以一种典型边缘倒角精冲件——刹车片钢背为研究对象,根据一系列研究提出了一种新工艺方案,并研制了一套4工步精冲连续模,获得了合格的钢背精冲件.为延长模具寿命,还提...
|
| 关 键 词： | 精冲 边缘倒角 数值模拟 润滑 |
Research on fine blanking technology for part with edge chamfer |
| |
| yANG Rui-feng,PENG Qun,ZHAO Yan-qi.Research on fine blanking technology for part with edge chamfer[J].Forging & Stamping Technology,2011,36(4):35-38. |
| |
| Authors: | yANG Rui-feng PENG Qun ZHAO Yan-qi |
| |
| Affiliation: | YANG Rui-feng1,PENG Qun2,ZHAO Yan-qi2(1.Machinery Technology Development Co.,Ltd.,Beijing Branch Company,Beijing 100083,China,2.Fine Blanking Center,Beijing Research Institute of Mechanical and Electrical Technology,China) |
| |
| Abstract: | The fine blanked part with edge chamfer must be manufactured by the combination with extrusion or cold forging.Some problems,such as the remarkable deviation of material feed step and part chamfer angle,etc.,were emerged due to the unbalanced forming force,which lead to unqualified part.Using the brake back shoe which was a typical fine blanking part with edge chamfer as object,a new approach was discussed for the fine blanking of this part based on a series of researches,and a 4-steps progressive fine blan... |
| |
| Keywords: | fine blanking edge chamfer numerical simulation lubrication |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
