| 基于Dynaform的激光拼焊板成形性能数值模拟研究 |
| |
| 引用本文： | 俞龙海,陈淑平. 基于Dynaform的激光拼焊板成形性能数值模拟研究[J]. 锻压技术, 2011, 36(4): 68-72. DOI: 10.3969/j.issn.1000-3940.2011.04.16 |
| |
| 作者姓名： | 俞龙海 陈淑平 |
| |
| 作者单位： | 1. 新余学院机械工程学院,江西新余,338004
2. 新余学院外国语学院,江西新余,338004 |
| |
| 摘 要： | 为了解决同种材料、等厚度激光拼焊板在数值模拟研究中如何建立准确的焊缝模型这一难题,通过显微硬度试验测量拼焊板焊接接头焊缝区和热影响区的硬度值,并对这些数据进行分析和计算,得到两个区域的材料力学性能参数,建立焊缝模型,并采用有限元模拟软件Dynaform 5.5对建立的焊缝模型进行数值模拟.通过模拟和试验结果的对比,验证...
|
| 关 键 词： | 拼焊板 数值模拟 焊缝建模 |
Numerical simulation research on formability of tailor-welded blanks based on Dynaform |
| |
| YU Long-hai,CHEN Shu-ping. Numerical simulation research on formability of tailor-welded blanks based on Dynaform[J]. Forging & Stamping Technology, 2011, 36(4): 68-72. DOI: 10.3969/j.issn.1000-3940.2011.04.16 |
| |
| Authors: | YU Long-hai CHEN Shu-ping |
| |
| Affiliation: | YU Long-hai1,CHEN Shu-ping2(1.College of Mechanical Engineering,Xinyu University,Xinyu 338004,China,2.College of Foreign Languages,China) |
| |
| Abstract: | How to create an exact finite element model of the weld bead is the urgent issue that needs to be solved during numerical simulation research of TWB with equal thickness and the same material.The hardness values of welded bead and heat affected zone in TWB were measured by tensile test,and were analyzed and calculated to obtain the mechanical properties of materials in TWB.And the finite element model of weld bead was set up.Then with the FEM software Dynaform 5.5,the finite element model of the weld bead w... |
| |
| Keywords: | tailor-welded blank numerical simulation model of weld bead |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
