首页 | 本学科首页   官方微博 | 高级检索  
     

镀液pH值对化学镀Ni-P镀层耐蚀性的影响
引用本文:唐静,张国福,张云霞.镀液pH值对化学镀Ni-P镀层耐蚀性的影响[J].电镀与环保,2012,32(3):28-30.
作者姓名:唐静  张国福  张云霞
作者单位:1. 辽宁石油化工大学机械工程学院,辽宁抚顺,113001
2. 辽宁石油化工大学继续教育学院,辽宁抚顺,113001
摘    要:考察了镀液pH值对化学镀Ni-P合金镀层沉积速率的影响。利用光学显微镜观察了在不同镀液pH值下所得镀层的表面形貌,采用极化曲线和电化学阻抗谱等电化学方法测试了镀液pH值对镀层耐蚀性的影响。结果表明:随着镀液pH值的增加,镀层沉积速率先增大后减小;当镀液pH值为7时,镀层表面最为致密,缺陷数量最少,并容易发生钝化,此时镀层表现出最好的耐蚀性。

关 键 词:化学镀Ni-P  镀液pH值  耐蚀性

Effects of Bath pH Value on the Corrosion Resistance of Electroless Ni-P Coating
TANG Jing , ZHANG Guo-fu , ZHANG Yun-xia.Effects of Bath pH Value on the Corrosion Resistance of Electroless Ni-P Coating[J].Electroplating & Pollution Control,2012,32(3):28-30.
Authors:TANG Jing  ZHANG Guo-fu  ZHANG Yun-xia
Affiliation:1.School of Mechanical Engineering,Liaoning Shihua University,Fushun 113001,China; 2.School of Continuing Education,Liaoning Shihua University,Fushun,113001,China)
Abstract:The effect of pH value on the deposition rate of electroless Ni-P coating was investigated,and the surface morphology of Ni-P coatings obtained at different pH values was observed using optical microscope,and the corrosion resistance was tested by polarization curve and electrochemical impedance spectroscopy.The results indicate that the deposition rate is increased first and then reduced with the increasing of pH value.The coating surface is the most compact,and the defect is the least when bath pH value is 7.0,moreover,the coating was easy to passivate.Thus,the coating obtained at pH=7.0 exhibits better corrosion resistance.
Keywords:electroless Ni-P plating  bath pH value  corrosion resistance
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号