| 钢管冲洗设备悬臂的设计及反变形制作工艺 |
| |
| 引用本文： | 杨光彩.钢管冲洗设备悬臂的设计及反变形制作工艺[J].钢管,2005,34(3):28-31. |
| |
| 作者姓名： | 杨光彩 |
| |
| 作者单位： | 攀钢集团成都钢铁有限责任公司,四川,成都,610066 |
| |
| 摘 要： | 钢管冲洗设备是西气东输工程焊管生产线的配套设备,用于清洗焊接钢管扩径后残留在钢管内外表面上的润滑油脂。介绍了冲洗设备的内冲洗部分的关键构件——悬臂的设计及用减小悬臂挠曲变形的反变形制作工艺。
|
| 关 键 词： | 焊接钢管 冲洗设备 悬臂 设计 反变形制作工艺 |
| 文章编号： | 1001-2311(2005)03-0028-04 |
| 修稿时间： | 2004年9月10日 |
Design and Anti-deformation Manufacturing Process of Cantilever of Steel Tube-flushing System |
| |
| Yang Guangcai.Design and Anti-deformation Manufacturing Process of Cantilever of Steel Tube-flushing System[J].Steel Pipe,2005,34(3):28-31. |
| |
| Authors: | Yang Guangcai |
| |
| Abstract: | To clear off the residual lubricant grease inside the welded steel tube left by the expanding pro- cess, the steel tube flushing system is used as a necessary equipment for the production line of welded pipes as used for the West-to-East Gas Transmission Pipe Line Project. Described in the paper are the design of the can- tilever, a key component of the internal flushing unit of the said flushing system, and the anti-deformation manu- facturing process of the cantilever which ensures the bending deformation of the cantilever to be minimized. |
| |
| Keywords: | Welded steel tube Flushing system Cantilever Design Anti-deformation manufacturing process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
