| 基于NURBS插补方法的五轴数控双样条曲线后处理研究 |
| |
| 引用本文： | 简启廉. 基于NURBS插补方法的五轴数控双样条曲线后处理研究[J]. 机电产品开发与创新, 2012, 25(3): 163-164 |
| |
| 作者姓名： | 简启廉 |
| |
| 作者单位： | 广州市沥滘污水处理厂,广东广州,510290 |
| |
| 摘 要： | 为得到NURBS插补方法的五轴数控NC代码,在完成相应的刀具路径源文件(CLSF)生成后,分析研究其后处理方法,并通过利用UG/GRIP二次开发语言在UG软件中生成相应的NC代码,生成后的NC代码在仿真软件中能很好的显示出其加工轨迹。
|
| 关 键 词： | NURBS插补方法 NC代码 UG/GRIP |
Study the Postprocessing of Five-axis NC Based on the NURBS Interpolation Method |
| |
| JIAN Qi-Lian. Study the Postprocessing of Five-axis NC Based on the NURBS Interpolation Method[J]. Development & Innovation of Machinery & Electrical Products, 2012, 25(3): 163-164 |
| |
| Authors: | JIAN Qi-Lian |
| |
| Affiliation: | JIAN Qi-Lian (Guangzhou Lijiao Sewage Treatment Plant, Guangzhou Guangdong 510290, China) |
| |
| Abstract: | In order to receive the NC code of five-axis NC using NURBS interpolation method, it studies the postprocessing method aider completing the corresponding CLSF. It also creates the NC code in UG software using UG/GRIP. The machining process can be imitated well in imitate software after NC code created. |
| |
| Keywords: | NURBS interpolation method NC code UG/GRIP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
