| 等径角挤压对Al-Cu-Mg-Ag合金组织性能的影响 |
| |
| 引用本文： | 肖代红,陈康华. 等径角挤压对Al-Cu-Mg-Ag合金组织性能的影响[J]. 材料科学与工艺, 2011, 19(6): 129-132,137 |
| |
| 作者姓名： | 肖代红 陈康华 |
| |
| 作者单位： | 中南大学粉末冶金国家重点实验室;中南大学粉末冶金国家重点实验室 |
| |
| 基金项目： | 湖南省自然科学基金资助项目(10JJ6066);国家重点基础研究发展计划资助项目(2012CB619502) |
| |
| 摘 要： | 为研究大塑形变形对耐热铝合金的作用,采用铸冶金工艺制备了新型的Al-Cu-Mg-Ag耐热铝合金,通过显微组织观察、差热分析及硬度测试等方法,研究了等径角挤压对耐热铝合金显微组织与力学性能的影响.结果表明:通过对挤压态的Al-Cu-Mg-Ag耐热铝合金在固溶淬火后时效前进行等径角挤压变形,可获得晶粒尺寸低于2μm的块体超...
|
| 关 键 词： | 铝铜镁银合金 等径角挤压 显微组织 力学性能 |
Effect of equal channel angular pressing on microstructure and properties of Al-Cu-Mg-Ag aluminum alloys |
| |
| XIAO Dai-hong and CHEN Kang-hua. Effect of equal channel angular pressing on microstructure and properties of Al-Cu-Mg-Ag aluminum alloys[J]. Materials Science and Technology, 2011, 19(6): 129-132,137 |
| |
| Authors: | XIAO Dai-hong and CHEN Kang-hua |
| |
| Affiliation: | State Key Lab of Powder Metallurgy,Central South University,Changsha 41083,China;State Key Lab of Powder Metallurgy,Central South University,Changsha 41083,China |
| |
| Abstract: | To research the effect of severe plastic deformation on the heat-resistant aluminum alloys,Al-Cu-Mg-Ag heat-resistant alloys were prepared by ingot metallurgy technology and equal channel angular pressing(ECAP) tests were carried out.The microstructure and mechanical properties of the alloys were investigated using microscopy,differential scanning calorimetry and hardness tester.It is shown that the ECAP in the solid solution and quenching state with aging treatment was quite effective in refining grains to 2 μm and improving the mechanical properties and heat-resistant properties.The ECAP treatment accelerates the aging hardening process of the extruded alloys,and increases the density of precipitate phase. |
| |
| Keywords: | Al-Cu-Mg-Ag aluminum alloys equal channel angular pressing microstructure mechanical properties |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《材料科学与工艺》浏览原始摘要信息 |
|
点击此处可从《材料科学与工艺》下载全文 |
