| 快速铸造收缩-扩张形气膜孔空心涡轮叶片 |
| |
| 引用本文： | 吴海华,李涤尘,邢建东.快速铸造收缩-扩张形气膜孔空心涡轮叶片[J].材料科学与工艺,2011,19(6):143-148. |
| |
| 作者姓名： | 吴海华 李涤尘 邢建东 |
| |
| 作者单位： | 西安交通大学机械制造系统工程国家重点实验室;西安交通大学机械制造系统工程国家重点实验室;西安交通大学机械制造系统工程国家重点实验室 |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目(2007CB707704);中国博士后科学基金资助项目(20100471615) |
| |
| 摘 要： | 本文将光固化成形技术和凝胶注模成形技术集成在一起,间接自由成形了带有收缩-扩张形气膜孔空心涡轮叶片整体式陶瓷铸型.通过建立收缩-扩张形气膜孔型芯干燥收缩受阻模型,推导了临界干燥收缩率计算公式,实验研究了凝胶注模成型坯体冻干特性.结果表明:冻干收缩率随着失水程度增加而增大,在失去约50%水分之后,干燥收缩停止;预冻温度越...
|
| 关 键 词： | 空心涡轮叶片 快速铸造 冷冻干燥 临界收缩率 凝胶注模成型 |
Rapid casting of hollow turbine blades with converging-expanding film cooling holes |
| |
| WU Hai-hu,LI Di-chen and XING Jian-dong.Rapid casting of hollow turbine blades with converging-expanding film cooling holes[J].Materials Science and Technology,2011,19(6):143-148. |
| |
| Authors: | WU Hai-hu LI Di-chen and XING Jian-dong |
| |
| Affiliation: | (State Key Laboratory of Manufacturing Systems Engineering,Xi’an Jiaotong Univetsity, Xi’an 710049,China) |
| |
| Abstract: | In this paper,a novel indirect solid freeform fabrication process was developed by combining gelcasting with stereolithography(SL) technique to manufacture integral ceramic casting molds for hollow turbine blades with converging-expanding film cooling holes.Based on the model of hindered drying shrinkage,a calculation formula of critical drying shrinkage was derived.Through experimental research,freeze-drying characteristics of gelcasting green bodies were discovered.The freeze-drying shrinkage was increased with water lose degree.After losing about 50 percent of water,the green body stopped shrinking.With the decrease of pre-freezing temperature,the freeze-drying shrinkage reduced.A suitable lyophilization process was adopted to control the freeze-drying shrinkage,and the structural integrity of ceramic casting mold was maintained.A rapid casting case study was presented to verify the feasibility and effectiveness of the proposed process. |
| |
| Keywords: | hollow turbine blade rapid casting freeze drying critical drying shrinkage gelcasting |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《材料科学与工艺》浏览原始摘要信息 |
|
点击此处可从《材料科学与工艺》下载全文 |
