Production of biohydrogen from waste wheat in continuously operated UPBR: The effect of influent substrate concentration

Utilization of waste materials is one of the most economical approaches to biohydrogen production. Continuous generation of biohydrogen in a bioreactor makes the process more economical with respect to the conventional physical and chemical method. The two main parameters that affect the biohydrogen production in a continuously operated bioreactor are hydraulic retention time (HRT) and influent substrate concentrations. The effect of influent substrate concentration on biohydrogen generation in an up-flow packed bed reactor (UPBR) at HRT = 3 h was investigated in this study. The substrate was waste wheat which was acid hydrolyzed in H₂SO₄ by adjusting the pH value to pH = 2, under high temperature as T = 90 °C in an autoclave to obtain fermentable sugar solution. A natural and porous support particle namely, aquarium biological sponge (ABS) was the microbial immobilization surface in the reactor. Total and hydrogen gas volumes, hydrogen percentage, influent and effluent substrate concentrations, VFA concentrations were monitored. The influent substrate concentration (TS_o) was varied between TS_o = 10 g/L and TS_o = 35 g/L. The process performance was evaluated as biohydrogen volume, percentages, rate and yield under varying operating conditions. The production volume (4275 ml/day) and the rate (3.05 L H₂/L day) were maximum at influent sugar concentration of TS_o = 25 g/L, but the yield reached to its maximum value as Y = 1.22 mol H₂/mol glucose at TS_o = 19 g/L. Substrate limitation and inhibitions were observed at influent concentrations of TS_o = 10 g/L and TS_o = 35 g/L, respectively. The results indicated that ABS could be suggested as a microbial support particle for hydrogen generation in immobilized systems.