| Abstract: | Regenerated cellulose fibers spun from straw pulp using the N-methylmorpholine N-oxide (NMMO) process were evaluated as a reinforcement for low-density polyethylene (LDPE). Surface fibrillation was carried out by a mechanical treatment to improve interfacial adhesion. Surface fibrillation resulted in a gradual change in surface topography, as detected by SEM. Long and numerous twisted fibrils were observed on the surface of the treated fibers. The fiber perimeters, determined by the Wilhelmy plate method, increased with an extended degree of fibrillation, while the strength of the fiber was not affected by the surface treatment. Model composites were prepared by embedding untreated and surface-fibrillated single fibers into an LDPE matrix, and the single fiber fragmentation (SEF) test was carried out to determine the critical fiber length. The interfacial shear strength (τ) was then calculated by applying a modified form of the Kelly-Tyson equation. It was found that the interfacial shear strength increased significantly as a result of surface fibrillation. The proposed mechanism for the improvement of interfacial adhesion is a mechanical anchoring between the matrix and the fiber. |
