| 基于小位移旋量的公差模拟建模及公差分析 |
| |
| 引用本文： | 吴兆强. 基于小位移旋量的公差模拟建模及公差分析[J]. 机械设计与制造, 2010, 0(1) |
| |
| 作者姓名： | 吴兆强 |
| |
| 作者单位： | 清华大学,北京,100084 |
| |
| 摘 要： | 公差分析是产品规范设计的重要内容,影响产品最终性能。研究了小位移旋量的公差建模方法,随机取值模拟配合表面在公差域内的变动。沿装配路径,采用齐次坐标逐步变换求解装配体封闭环相对全局坐标的变动,进行了三维公差分析,利用一定规模的模拟样本表现累积误差的分布形式。用实例验证了方法的有效性。
|
| 关 键 词： | 小位移旋量 公差建模 公差分析 随机模拟 |
Stimulated tolerances modeling based on small displacement torsors and tolerances analysis |
| |
| WU Zhao-qiang. Stimulated tolerances modeling based on small displacement torsors and tolerances analysis[J]. Machinery Design & Manufacture, 2010, 0(1) |
| |
| Authors: | WU Zhao-qiang |
| |
| Affiliation: | Tsinghua University/a>;Beijing 100084/a>;China |
| |
| Abstract: | Tolerances analysis is the most important task in the procedure of specification designing of product,and influences the capability of end product.Tolerances modeling based on small displacement torsors(SDT)was studied,and translation and rotation of the mating surfaces in the tolerance zone was simulated by generated random number for the SDT vector.Followed from assembly route,deviation of the closed loop from global coordinate system was calculated by Homogeneous coordinate Transformation Matrix from pre... |
| |
| Keywords: | SDT Tolerance modeling Tolerance analysis Simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
