| 加工工艺对稀土HSn62-1黄铜耐脱锌腐蚀性能的影响 |
| |
| 引用本文： | 刘坚锋,陈一胜,朱志云,刘永丹. 加工工艺对稀土HSn62-1黄铜耐脱锌腐蚀性能的影响[J]. 铝加工, 2009, 0(2): 24-26 |
| |
| 作者姓名： | 刘坚锋 陈一胜 朱志云 刘永丹 |
| |
| 作者单位： | 江西理工大学材料与化学工程学院,江西,赣州,341000 |
| |
| 摘 要： | 采用脱锌腐蚀深度测量方法、恒电位测试方法和光学显微镜等分析方法，研究了不同的加工工艺对稀土HSn62—1黄铜的耐税锌腐蚀性能的影响。结果表明，冷轧态的黄铜，由于β相沿着冷加工方向分布，同时位错密度和残余应力的增加，导致了其耐脱锌腐蚀性能比热轧态的黄铜和铸造态的黄铜差。热轧态的黄铜，由于在热加工过程中发生了回复和再结晶，使得其耐蚀性和铸造态的相当。
|
| 关 键 词： | 稀土HSn62-1黄铜 热轧 冷轧 耐脱锌腐蚀 电化学 |
The Effect of Processing Techniques on Corrosion Resistance of RE HSn62-1 Brass |
| |
| LIU Jian-feng,CHEN Yi-sheng,ZHU Zhi-yun,LIU Yong-dan. The Effect of Processing Techniques on Corrosion Resistance of RE HSn62-1 Brass[J]. Aluminium Fabrication, 2009, 0(2): 24-26 |
| |
| Authors: | LIU Jian-feng CHEN Yi-sheng ZHU Zhi-yun LIU Yong-dan |
| |
| Affiliation: | School of Material and Chemistry Engineering;Ganzhou 341000;China |
| |
| Abstract: | The effect of various prcessing techniques on corrosion resistance of RE HSn62-1 brass were investigated using dezincifieation corrosion depth testing, potential tests and optical mieroscope. The results show that dezineification corrosion resistance of cold-rolled RE HSn62-1 brass is worse than that of hot-rolled brass and as-cast brass due to β phase distributed along cold-working direction and the increase of dislocation density and residual stress. The corrosion resistance of hot-roiled brass is equivalent to that of as-cast brass due to dynamic recovery and recrystallization during hot rolling. |
| |
| Keywords: | RE HSn62-1 brass hot-rolling cold-rolling dezincification corrosion resistance electrochemical |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
