| 基于NX6和VERICUT的叶轮五轴车铣复合加工技术研究 |
| |
| 引用本文： | 吴昊,王凌云,曹永洁.基于NX6和VERICUT的叶轮五轴车铣复合加工技术研究[J].制造技术与机床,2012(4):35-38. |
| |
| 作者姓名： | 吴昊 王凌云 曹永洁 |
| |
| 作者单位： | 上海工程技术大学制造工程系,上海,200437 |
| |
| 基金项目： | 上海市教委自然科学基金资助项目(gjd-09041) |
| |
| 摘 要： | 研究在五轴车铣复合加工中心上,利用NX6.0和VERICUT软件实现整体式叶轮加工的工作流程及刀轴方向控制、程序仿真及后处理等关键技术.着重介绍如何通过NX6.0软件的刀轴插补功能和VERICUT软件的自动对比功能,以避免发生加工干涉与过切.
|
| 关 键 词： | 整体式叶轮 车铣复合加工中心 刀轴控制 虚拟制造 |
Study on impeller 5-axis turning-milling compounding processing technique based on NX6 and VERICUT |
| |
| WU Hao
,
WANG Lingyun
,
CAO Yongjie.Study on impeller 5-axis turning-milling compounding processing technique based on NX6 and VERICUT[J].Manufacturing Technology & Machine Tool,2012(4):35-38. |
| |
| Authors: | WU Hao WANG Lingyun CAO Yongjie |
| |
| Affiliation: | (Department of Manufacturing Engineering,Shanghai University of Engineering Science,Shanghai 200437,CHN) |
| |
| Abstract: | This article studies the procedure of using NX6 and VERICUT software to realize the impeller processing on 5-axis Turning-milling compounding NC machine tool and the key techniques of tool direction controlling,NC program simulation and post-processing.And emphatically introduces how to avoid interference and over cutting by the tool axis interpolation function of NX6 and the automatic comparison function of VERICUT. |
| |
| Keywords: | One-piece Impeller Turning-milling Compounding Machining Center Tool Axis Controlling Virtual Manufacturing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
