Optimal design of stepped circular plates with allowance for the effect of transverse shear deformation |
| |
Authors: | K. C. Chung C. M. Wang |
| |
Affiliation: | a Department of Applied Mathematics, The Hong Kong Polytechnic University, Hung Hom, Hong Kong;b Department of Civil Engineering, The National University of Singapore Kent Ridge, Singapore 119260, Singapore |
| |
Abstract: | Presented herein is a canonical exact deflection expression for stepped (or piecewise-constant thickness) circular plates under rotationally symmetric transverse loads. The circular plates may be either simply supported or clamped at the edges. As the plates may be very thick or certain portions of the optimal design may become rather thick, the significant effect of transverse shear deformation on the deflections cannot be ignored. This effect was taken into consideration in accordance to the Mindlin plate theory. Based on the analytical deflection expression, necessary conditions are derived for the optimal values of segmental lengths and thicknesses that minimize the maximum deflection of stepped circular plates of a given volume. These optimality conditions are solved using the Newton method for the optimal segmental lengths and thicknesses. Local minima are observed for this nonlinear problem at hand and they may pose some difficulties in getting the solutions. The shear deformation effect increases the plate deflections, but interestingly it affects the thickness variation marginally. |
| |
Keywords: | Circular plates Shear deformation Stepped plates Optimality conditions Optimal design |
本文献已被 ScienceDirect 等数据库收录! |
|