| 基于Pro/E和ADAMS的轮式装载机行驶稳定系统分析 |
| |
| 引用本文： | 徐格宁,吴兵.基于Pro/E和ADAMS的轮式装载机行驶稳定系统分析[J].中国工程机械学报,2011,9(1):92-97. |
| |
| 作者姓名： | 徐格宁 吴兵 |
| |
| 作者单位： | 太原科技大学,机械电子工程学院,山西,太原,030024 |
| |
| 摘 要： | 针对为减小轮式装载机物料洒落而加入的液压减振回路的行驶稳定系统,建立其数学振动模型,推导出行驶稳定系统的等效刚度、阻尼并分析其影响因素.为求解数学振动模型的特性参数,采用Pro/E建模和ADAMS仿真方法.分析仿真结果表明:加入液压减振回路可减小行驶稳定系统的振动,而减振效果的关键是选取合适的蓄能器参数.
|
| 关 键 词： | 行驶稳定系统 刚度 阻尼 Pro/E软件 ADAMS软件 |
Pro/E-and ADAMS-based driving stabilization system analysis on wheel loaders |
| |
| XU Ge-ning,WU Bing.Pro/E-and ADAMS-based driving stabilization system analysis on wheel loaders[J].Chinese Journal of Construction Machinery,2011,9(1):92-97. |
| |
| Authors: | XU Ge-ning WU Bing |
| |
| Affiliation: | XU Ge-ning,WU Bing(School of Machinery & Electronics Engineering,Taiyuan University of Science Technology,Taiyuan 030024,China) |
| |
| Abstract: | To reduce the material spillage from wheel loaders,a driving stabilization system is added for hydraulic vibration-reduction circuits.In this way,a mathematical vibration model is established to deduce the equivalent system stiffness and damping and analyze relevant influence factors.To solve model properties,a simulation method is developed based on Pro/ETM and ADAMSTM.Therefore,it is found from simulation results that the additional hydraulic vibration-reduction circuit can reduce the system vibration,whe... |
| |
| Keywords: | driving stabilization system stiffness damping Pro/E ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
