| 基于激光光切法的MEMS器件高度在线检测方法(英文) |
| |
| 引用本文： | 曾涛,石庚辰,张兵,王禛,王倩倩.基于激光光切法的MEMS器件高度在线检测方法(英文)[J].纳米技术与精密工程,2012(5):422-428. |
| |
| 作者姓名： | 曾涛 石庚辰 张兵 王禛 王倩倩 |
| |
| 作者单位： | 北京理工大学机电工程与控制国家级重点实验室,北京100081 |
| |
| 基金项目： | 武器装备预研基金资助项目. |
| |
| 摘 要： | 为了解决MEMS器件在加工过程中在线高度检测的困难,提出了一种基于激光光切法的MEMS器件高度在线检测方法.首先建立了用以验证激光光切法有效性的高度在线检测系统;然后提出了一种基于阈值分割、数学形态学、逐行扫描法和加权最小二乘法的快速激光中心线提取算法.实验表明,建立的高度在线检测系统的最大平均误差及误差的均方差分别为-6.38μm和1.87μm,且检测一次高度的时间为1.03 s.因此,激光光切法可以用于MEMS器件高度的在线检测.
|
| 关 键 词： | MEMS 高度在线检测 激光光切法 图像检测 |
Online Height Detection Method of MEMS Device Based on Laser Light Section |
| |
| ZENG Tao,SHI Geng-chen,ZHANG Bing,WANG Zhen,WANG Qian-qian.Online Height Detection Method of MEMS Device Based on Laser Light Section[J].Nanotechnology and Precision Engineering,2012(5):422-428. |
| |
| Authors: | ZENG Tao SHI Geng-chen ZHANG Bing WANG Zhen WANG Qian-qian |
| |
| Affiliation: | (National Key Laboratory of Mechatronic Engineering and Control, Beijing Institute of Technology, Beijing 100081, China) |
| |
| Abstract: | In order to solve the problem of online height detection during the processing of micro elec- tro mechanical system （MEMS） devices, an online height detection method of MEMS devices based on laser light section was proposed. Firstly, an online height detection system was established to verify the validity of laser light section; secondly, based on threshold segmentation, mathematical morphology, progressive scanning method and weighted least squares method, a fast method for extracting centric line of laser line was proposed. Experimental resuhs show that the maximum mean error and mean square deviation of the online height detection system are -6.38 μm and 1.87 μm, respectively, and the detection time of one height measurement is 1.03 s. So the laser light section can be employed in online height detection of MEMS devices. |
| |
| Keywords: | MEMS online height detection laser light section image detection |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
