| 基于CAE的薄壁注塑件翘曲变形研究 |
| |
| 引用本文： | 田志飞,王波,赵新杰,王震. 基于CAE的薄壁注塑件翘曲变形研究[J]. 塑料工业, 2011, 39(9) |
| |
| 作者姓名： | 田志飞 王波 赵新杰 王震 |
| |
| 作者单位： | 郑州大学材料科学与工程学院,河南郑州,450001 |
| |
| 基金项目： | 郑州大学创新实验计划资助项目(2010cxsy135) |
| |
| 摘 要： | 对于薄壁注塑件,翘曲变形是影响其质量最主要的问题之一。以碎纸机进纸口薄壁件为例,采用Moldflow软件对制品的注塑工艺进行了数值模拟。通过采用正交试验,获得了不同工艺条件下的翘曲变形值,从而寻找出影响翘曲变形的关键因素和最优的工艺参数组合。
|
| 关 键 词： | 薄壁 注塑 翘曲变形 正交试验 CAE |
Research on Warpage of Thin-wall Injection Molded Part Based on CAE |
| |
| TIAN Zhi-fei,WANG Bo,ZHAO Xin-jie,WANG Zhen. Research on Warpage of Thin-wall Injection Molded Part Based on CAE[J]. China Plastics Industry, 2011, 39(9) |
| |
| Authors: | TIAN Zhi-fei WANG Bo ZHAO Xin-jie WANG Zhen |
| |
| Affiliation: | TIAN Zhi-fei,WANG Bo,ZHAO Xin-jie,WANG Zhen(School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450001,China) |
| |
| Abstract: | For thin-wall injection molded parts,warpage was one of the most important factors affecting the quality of products.In this paper,a thin-wall plastic part used in the kneader was taken as an example;the injection molding process of the part was simulated by using Moldflow software.Based on the orthogonal test,the warpage values for different process conditions were obtained.Then,the key factors influencing warpage and the optimal process parameter combination were found out. |
| |
| Keywords: | Thin-wall Injection Molding Warpage Orthogonal Test CAE |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
