| 组合型腔注塑模浇注系统的平衡设计与优化 |
| |
| 引用本文： | 王波,王震,田志飞,赵新杰.组合型腔注塑模浇注系统的平衡设计与优化[J].塑料工业,2011,39(8). |
| |
| 作者姓名： | 王波 王震 田志飞 赵新杰 |
| |
| 作者单位： | 郑州大学材料科学与工程学院,河南郑州,450001 |
| |
| 基金项目： | 郑州大学创新实验计划资助项目(2010cxsy135) |
| |
| 摘 要： | 针对复杂形状盒体的组合型腔注塑模,利用Moldflow2010软件对其进行了流动平衡分析。以充填时间、注射压力、锁模力等分析结果为依据,判定充填平衡效果。通过调整分流道和浇口尺寸,进行了两次优化,最终确定了最佳的浇注系统设计方案。本文可为类似注塑模浇注系统的平衡设计提供参考。
|
| 关 键 词： | Moldflow 流动平衡 浇注系统 优化 |
Balanced Design and Optimization of Gating System for Combined Cavity Injection Mould |
| |
| WANG Bo,WANG Zhen,TIAN Zhi-fei,ZHAO Xin-jie.Balanced Design and Optimization of Gating System for Combined Cavity Injection Mould[J].China Plastics Industry,2011,39(8). |
| |
| Authors: | WANG Bo WANG Zhen TIAN Zhi-fei ZHAO Xin-jie |
| |
| Affiliation: | WANG Bo,WANG Zhen,TIAN Zhi-fei,ZHAO Xin-jie(School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450001,China) |
| |
| Abstract: | For the combined cavity injection mould of a box with complex shape,flow balance was analyzed by using Moldflow2010 software.The filling effect was estimated based on the analysis of filling time,injection pressure,clamping force,etc.After two modifications,with adjusting the size of sub-channel and gate,the optimum gating system was finally ascertained.This work can be a useful reference for the balanced design of gating system of similar injection mould. |
| |
| Keywords: | Moldflow Flow Balance Gating System Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
