| 弧齿锥齿轮安装位置的计算机模拟 |
| |
| 引用本文： | 刘光磊 沈允文 等. 弧齿锥齿轮安装位置的计算机模拟[J]. 机械科学与技术, 2001, 20(1): 74-75 |
| |
| 作者姓名： | 刘光磊 沈允文 等 |
| |
| 作者单位： | 西北工业大学!西安710072 |
| |
| 基金项目： | 重庆大学机械传动国家重点实验室开放基金项目 |
| |
| 摘 要： | 经啮合原理分析而得到的弧齿锥齿轮的齿面网格坐标是相对于齿轮坐标系而言的 ,不可避免地存在计算误差。而一对弧齿锥齿轮在安装完成之后 ,要求两个齿面的基点在空间重合 ,该点的齿面幺法矢共线。本文对此进行了分析模拟。
|
| 关 键 词： | 弧齿锥齿轮 安装位置 计算机模拟 |
| 文章编号： | 1003-8728(2001)01-0074-02 |
| 修稿时间： | 1999-12-14 |
Computer Simulation for the Assembly Position of a Pair of Spiral Bevel Gear |
| |
| LIU Guang-lei,SHEN Yun-wen,WANG San-min. Computer Simulation for the Assembly Position of a Pair of Spiral Bevel Gear[J]. Mechanical Science and Technology for Aerospace Engineering, 2001, 20(1): 74-75 |
| |
| Authors: | LIU Guang-lei SHEN Yun-wen WANG San-min |
| |
| Abstract: | The exterior meshing coordinates of a spiral bevel gear obtained by the analysis of meshing principle are relative to the coordinate system tied to the gear, and there exists some error inevitably. It is required that the two exterior base points of a pair of spiral bevel gears concerned should coincide with each other. The two normal lines of the two points should also be the same after the gears have been put together. In this paper, we analyzed this problem in detail and carried out computer simulations. |
| |
| Keywords: | Spiral bevel gear Assembly position Computer simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
