| 高效耐磨金刚石锯片的研制 |
| |
| 引用本文： | 宋城,樊雪琴.高效耐磨金刚石锯片的研制[J].金刚石与磨料磨具工程,2006(6):32-35. |
| |
| 作者姓名： | 宋城 樊雪琴 |
| |
| 作者单位： | 河南工业大学,郑州,450007;河南工业大学,郑州,450007 |
| |
| 摘 要： | 采用正交实验的方法,对公路维修金刚石锯片胎体材料的有关参数进行了研究,实验对比了18种胎体配方的硬度及抗弯强度,选择几种优良胎体配方进行进一步的实验,对其性能及其稳定性进行比较,选择出优质胎体配方;在其中掺入金刚石,采用适当的烧结工艺制造出金刚石锯片,进行切割混凝土实验.综合分析实验结果,表明实验中加入适量低熔点金属和粗粒度金刚石提高了切割效率,加入细粒度金刚石可以有效地提高金刚石锯片的耐磨性,从而研制出高效耐磨金刚石锯片.
|
| 关 键 词： | 正交设计 混凝土 高效 耐磨 |
| 文章编号： | 1006-852X(2006)05-0032-04 |
| 修稿时间： | 2006年7月12日 |
Preparation of high- efficient and wear- resisting diamond saw |
| |
| Song Cheng,Fan Xueqin.Preparation of high- efficient and wear- resisting diamond saw[J].Diamond & Abrasives Engineering,2006(6):32-35. |
| |
| Authors: | Song Cheng Fan Xueqin |
| |
| Abstract: | The orthogonal experimental design was used to study diamond saw matrix for cutting the concrete.The hardness and bending strength of 18 kinds of diamond saw matrixes were compared.The optimal diamond saw matrixes were further studied.The most opitimal diamond saw matrix was decided.Then,the diamond saw was made by hot pressing,which was used to cut the concrete.The results showed that coarse diamond particles and low melting point metal were fit to increase cutting efficiency of the saw,and fine size diamond particles were benefcial to increase the wear resistance of the saw. |
| |
| Keywords: | orthogonal experimental design concrete high efficiency wear resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
