| 硬模铸造TiAl合金的凝固组织分析 |
| |
| 引用本文： | 李胜,朱春雷,骆晨,张继. 硬模铸造TiAl合金的凝固组织分析[J]. 特种铸造及有色合金, 2011, 31(10): 914-917. DOI: 10.3870/tzzz.2011.10.009 |
| |
| 作者姓名： | 李胜 朱春雷 骆晨 张继 |
| |
| 作者单位： | 钢铁研究总院高温材料研究所 |
| |
| 基金项目： | 国家重点基础研究发展计划"973计划"资助项目 |
| |
| 摘 要： | 试验观察分析了两种硬模和陶瓷型壳铸造TiAl合金宏观、微观组织特点。结果表明,硬模铸造板片的表面细晶层的晶粒尺寸成倍减小,柱状晶宽度明显变窄,中心等轴晶体积分数大幅度降低、尺寸减小;硬模铸造板片的表面细小晶粒由取向随机的层片团组成,柱状晶由有取向的层片组成,层片方向垂直于柱状晶生长方向,中心等轴晶由取向随机的层片组织组成,层片间距明显减小。
|
| 关 键 词： | TiAl合金 硬模铸造 凝固组织 |
Solidification Structure of TiAl Intermetallic-based Alloy in Permanent Mould Casting |
| |
| Li Sheng,Zhu Chunlei,Luo Chen,Zhang Ji. Solidification Structure of TiAl Intermetallic-based Alloy in Permanent Mould Casting[J]. Special Casting & Nonferrous Alloys, 2011, 31(10): 914-917. DOI: 10.3870/tzzz.2011.10.009 |
| |
| Authors: | Li Sheng Zhu Chunlei Luo Chen Zhang Ji |
| |
| Affiliation: | Li Sheng,Zhu Chunlei,Luo Chen,Zhang Ji(High Temperature Materials Division,China Iron and Steel Research Institute Group) |
| |
| Abstract: | Macrostructure and microstructure of TiAl alloys in two kinds permanent mould casting and in ceramic mould casting were observed by OM(optical microscope) and SEM(scanning electron microscope) . The results show that gain size on fine gain layer of surface of TiAl alloy plate in permanent mould is decreased greatly,and width of columnar grain zone is narrowed,meanwhile,volumetric fraction of equiaxed grain in the center is decreased sharply with the decrease of grain size. Fine grain on surface of TiAl allo... |
| |
| Keywords: | TiAl Alloy Permanent Mould Casting Solidification Structure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
