Phase-noise analysis of MEMS-based circuits and phase shifters |
| |
Authors: | Rebeiz GM |
| |
Affiliation: | Dept. of Electr. Eng. & Comput. Sci., Michigan Univ., Ann Arbor, MI; |
| |
Abstract: | The effect of Brownian, acceleration, acoustic, and power-supply noise on MEMS based circuits has been calculated for MEMS.-based circuits (phase shifters, delay circuits). The calculations are done for capacitive shunt MEMS switches and metal-to-metal contact series MEMS switches. It is found that these effects result in both an amplitude and phase noise, with the phase noise being around 100× larger than the amplitude noise. The phase noise due to Brownian motion is negligible for MEMS switches with k ≃ 1.0 N/m, g0 > 2 μm, Q > 0.5, and f0 ≃ 50 kHz. The effect of acceleration and acoustic noise is negligible for a total acceleration noise of 10 g or less and a total acoustic noise of 74-dB sound pressure level. The power-supply noise depends on the bias conditions of the MEMS element, but is negligible for MEMS switches with a bias voltage of 0 V and a total noise voltage of 0.1 V or less. It is also found that metal-to-metal contact series switches result in much less phase noise than standard capacitive shunt switches. The phase noise increases rapidly for low spring-constant bridges (k = 0.24 N/m), low-height bridges, and bridges with a large mechanical damping (Q < 0.3). Also, varactor-based designs result in 30-40 dB more phase noise than switch-based circuits. This paper proves that microwave passive circuits built using MEMS switches (with a proper mechanical design) can be used in most commercial and military applications without any phase-noise penalty |
| |
Keywords: | |
|
|