| 基于Pro/E的泵叶轮体注射模设计 |
| |
| 引用本文： | 夏晓峰.基于Pro/E的泵叶轮体注射模设计[J].模具工业,2006,32(12):57-61. |
| |
| 作者姓名： | 夏晓峰 |
| |
| 作者单位： | 第一汽车集团公司教育培训中心,吉林,长春,130011 |
| |
| 摘 要： | 以泵叶轮体注射模的设计过程为例,在分析塑料成型工艺的基础上,基于Pro/E的CAD/CAM模块,对该注射模具的设计过程进行了全面的阐述。与传统的注射模设计相比,应用Pro/E的CAD/CAM模块进行注射模设计,可以大大缩短产品研发周期、模具设计周期和加工周期,提高产品设计的准确性,降低产品开发和模具设计成本。
|
| 关 键 词： | 注射模设计 Pro/E 泵叶轮体 |
| 文章编号： | 1001-2168(2006)12-0057-05 |
| 收稿时间： | 06 25 2006 12:00AM |
| 修稿时间： | 2006年6月25日 |
Pro/E-based design of injection mould for pump impeller body |
| |
| XIA Xiao-feng.Pro/E-based design of injection mould for pump impeller body[J].Die & Mould Industry,2006,32(12):57-61. |
| |
| Authors: | XIA Xiao-feng |
| |
| Affiliation: | Education and Training Center, China FAW Group Corporation, Changchun, Jilin 130011, China |
| |
| Abstract: | An injection mould for pump impeller body was designed based on an analysis of plastic forming process and CAD/CAM module of Pro/E software. The design procedure of the mould was described in detail. Compared with conventional design, this computer-aided method can greatly shorten the period in developing, designing and manufacturing. At the same time, the design accuracy can be enhanced and the cost of development be greatly decreased. |
| |
| Keywords: | Pro/E |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
