首页 | 本学科首页   官方微博 | 高级检索  
     

石墨炉原子吸收法测定低合金钢中铅
引用本文:王莹,戚淑芳,张杰. 石墨炉原子吸收法测定低合金钢中铅[J]. 鞍钢技术, 2010, 0(6): 35-37. DOI: 10.3969/j.issn.1006-4613.2010.06.008
作者姓名:王莹  戚淑芳  张杰
作者单位:鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009;鞍钢股份有限公司技术中心,辽宁,鞍山,114009
摘    要:提出了一种石墨炉原子吸收测定钢中痕量铅的方法。本方法对仪器的最佳分析条件、升温程序、背景干扰及消除的情况进行了研究。采用稀硝酸溶解试样,1%NH4H2PO4+0.3%Mg(NO3)2为基体改进剂,在优化的实验条件下,铅的质量浓度在0~0.1μg/mL范围内呈良好的线性关系,定量下限为0.002μg/mL,加标回收率为92.86%~105.96%。采用本方法对4种钢铁标准样品进行测定,结果显示准确度、精密度均满足要求。

关 键 词:石墨炉原子吸收  低合金钢  

Determining Content of Pb in the Low-alloy Steel by Graphite Furnace Atomic Absorption Method
Wang Ying,Qi Shufang,Zhang Jie. Determining Content of Pb in the Low-alloy Steel by Graphite Furnace Atomic Absorption Method[J]. Aisc Techniques, 2010, 0(6): 35-37. DOI: 10.3969/j.issn.1006-4613.2010.06.008
Authors:Wang Ying  Qi Shufang  Zhang Jie
Affiliation:Wang Ying,Qi Shufang,Zhang Jie(Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China)
Abstract:The method for determination of trace amount of lead(Pb)in the steel by graphite furnace atomic absorption technology is proposed.The optimum conditions for analysis,the temperature rising procedures,the background interference to the device and the elimination of the interference are studied.The sample is dissolved by the dilute nitric acid and 1%NH4H2PO4 and 0.3%Mg(NO3)2 are used to be the matrix improver,and under the optimized conditions for experiment,the mass concentration of Pb appears good linear re...
Keywords:graphite furnace atomic absorption  low-alloy steel  Pb  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号